Need help?Do you have a question about the Creality HALOT-ONE PRO and is the answer not in the manual?
Guide on using slicing software to prepare models for printing.
Steps for transferring sliced files via USB disk and initiating the printing process.
A diagnostic flowchart to identify and resolve common printer issues.
Guide on using slicing software to prepare models for printing.
Steps for transferring sliced files via USB disk and initiating the printing process.
A diagnostic flowchart to identify and resolve common printer issues.
General| Technology | MSLA |
|---|---|
| Layer Resolution | 0.01 - 0.2 mm |
| Light Source | UV LED |
| Wavelength | 405 nm |
| Connectivity | USB |
| Power Consumption | 60W |
| Net Weight | 6.5 kg |
| Print Technology | LCD |
| XY Resolution | 0.05 mm |
| Display | Touchscreen |
| Slicing Software | CHITUBOX |
| Power Input | 100-240V |
| Supported File Formats | STL |
To Next Page