Need help?Do you have a question about the Creality HALOT-MAGE and is the answer not in the manual?
General| Build Volume | 228 x 128 x 230 mm |
|---|---|
| Layer Resolution | 0.01 - 0.2 mm |
| Light Source | Integral Light Source |
| Connectivity | USB, Wi-Fi |
| Printing Speed | Up to 60 mm/h |
| Layer Thickness | 0.01 - 0.2 mm |
| UV LED matrix | Yes |
| Wavelength | 405 nm |
| Print Speed | Up to 60 mm/h |
| Power Consumption | 120W |
| Material Compatibility | 405nm UV resin |
| LCD Resolution | 8K (7680 x 4320 pixels) |
| Weight | 12 kg |
| Print Technology | LCD-based SLA |
| Slicer Software | HALOT BOX |
| Power Input | 100-240V, 50/60Hz |
| Operating System | Linux |
| Resolution | 8K |
Guide to using HALOT BOX, LycheeSlicer, and CHITUBOX for model preparation and slicing.
Instructions for generating G-code files and printing models using a USB disk.
To Next Page