Need help?Do you have a question about the Creality CR-10 S5 and is the answer not in the manual?
General| Build Volume | 500 x 500 x 500 mm |
|---|---|
| Layer Resolution | 0.1-0.4 mm |
| Printing Speed | Up to 200 mm/s |
| Filament Diameter | 1.75 mm |
| Connectivity | SD card, USB |
| Frame Material | Aluminum |
| Display | LCD screen |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Heated Bed | Yes |
| Bed Temperature | Up to 100°C |
| Nozzle Temperature | Up to 250°C |
| File Format | STL, OBJ, G-code |
| Nozzle Diameter | 0.4 mm |
| Supported Filaments | PLA, ABS, TPU |
| Power Supply | AC 110-220V |
To Next Page
