Need help?Do you have a question about the Creality CR-10 and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Layer Resolution | 0.1-0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | SD card, USB |
| Supported Materials | PLA, ABS, PETG, TPU |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Display | LCD screen |
| Bed Leveling | Manual |
| Power Supply | 110V / 220V |
| Frame Structure | Aluminum |
| Bed Temperature | Up to 100°C |
| Nozzle Temperature | Up to 250°C |
Contact details for Alza.cz a.s., the product importer.
Instructions for downloading and updating the printer's firmware from the official website.
Key safety precautions and operational recommendations for using the printer.
Diagram and list identifying the main parts of the 3D printer.
Table comparing specifications across different CR-10 printer models.
Visual identification of primary printer components like the base frame and control box.
List of all tools and accessories supplied with the 3D printer for assembly and maintenance.
Step-by-step instructions for installing the gantry frame and T-shaped fixing block.
Guide for connecting stepper motors, limit switches, and setting correct input voltage.
Instructions for attaching the printer rack and the filament spool holder.
Method for applying decorative strips to personalize the printer's appearance.
Detailed explanation of all displayed information and icons on the printer's screen.
Overview of accessing and using various menus like Prepare, Control, and Tune.
Step-by-step guide for preheating the nozzle and successfully feeding filament.
Advice and techniques for changing filament during operation.
Procedure for checking and adjusting V-wheels on the X and Y axes for smooth operation.
Method for adjusting Z axis V-wheels to ensure smooth platform movement.
Detailed instructions for adjusting the print bed to achieve optimal nozzle height.
Instructions on downloading and installing the necessary slicing software.
Steps to complete the software setup, including language and machine selection.
Guide to slicing 3D models and initiating prints from the TF card.
Description of different FDM filament series (HP, CR, HC, Ender) and their properties.
Introduction to various UV sensitive resins like Standard, Low Odour, and ABS-like.
Details on Dental Cast, Elastic, Water Washable, Toughness, High Temp, and Jewellery resins.
Comparative table of technical parameters for various UV sensitive resins.
Table detailing filament properties (temp, difficulty, etc.) and applicable printer models.
Information on the 2-year warranty and specific conditions that may void it.
Guidelines for environmentally responsible disposal of the electronic product.
To Next Page
