Need help?Do you have a question about the Creality CR-10 Smart and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Layer Resolution | 0.1-0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Touchscreen | Yes |
| Bed Temperature | up to 100°C |
| Nozzle Temperature | up to 260°C |
| Frame Material | Aluminum |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Heated Bed | Yes |
| Power Supply | 350W |
| Machine Dimensions | 578 x 522 x 648 mm |
| Machine Weight | 14 kg |
| Connectivity | Wi-Fi, USB |
| Supported Filaments | PLA, TPU, PETG |
| Bed Leveling | Automatic |
To Next Page