Need help?Do you have a question about the Creality CR-10 V3 and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Extruder Type | Direct Drive |
| Nozzle Diameter | 0.4 mm |
| Layer Resolution | 0.1-0.4 mm |
| Print Speed | up to 180 mm/s |
| Filament Diameter | 1.75 mm |
| Supported Filaments | PLA, ABS, PETG, TPU |
| Connectivity | SD card, USB |
| Bed Leveling | Manual |
| Frame Material | Aluminum |
| Bed Temperature | up to 100°C |
| Nozzle Temperature | up to 260°C |
| Printing Technology | FDM |
| Power Supply | 350W |
| Input Voltage | 110V/220V AC |
| Display | LCD |
To Next Page