Need help?Do you have a question about the Creality Ender-3 V3 SE and is the answer not in the manual?
General| Build Volume | 220 x 220 x 250 mm |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Supported Materials | PLA, PETG, TPU |
| Bed Temperature | Up to 100°C |
| Nozzle Temperature | Up to 260°C |
| Extruder Type | Direct Drive |
| Power Supply | 350W |
| Print Speed | 250 mm/s |
| Connectivity | USB, SD Card |
| Bed Leveling | Automatic |
Steps to assemble the printer's gantry frame.
Instructions for attaching the display screen to the printer.
Procedure for fixing the material rack assembly to the gantry frame.
Guide for correctly wiring the printer's components and power supply.
Steps for manual and auto filament loading into the 3D printer.
Procedure for performing auto-leveling on the printing platform.
Steps to preheat the printer for PLA or TPU filament types.
Guide to installing slicing software and preparing print files.
Instructions for selecting and initiating print jobs from a storage card.
How to safely remove and maintain the printing platform.
Recommendations for lubricating and maintaining the printer's screws and shafts.
Step-by-step guide for replacing the printer's nozzle.
Common issues and their potential causes and solutions for the printer.
To Next Page