Ender-3 Pro Series 3D Printer
[ To make Top-quality 3D printer]
To be the Chief Evangelist
◆ This guide is for the Ender-3 Pro Series of 3D printers.
◆ Select the correct input voltage to match your local mains
(230V or 115V)
◆ Because of software/hardware upgrades and model
differences, new revisions may not be listed in this guide.
◆ Please plug the power cord into a three−hole power jack.
◆ Detailed instr
uctions for use are available in the TF card.
Guide Book
To Next Page
Need help?
General
