Need help?Do you have a question about the Creality Ender 3 Neo and is the answer not in the manual?
General| Build Volume | 220 x 220 x 250 mm |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 260°C |
| Max Bed Temperature | 100°C |
| Power Supply | 350W |
| Print Technology | FDM |
| Machine Weight | 7.8 kg |
| Supported Materials | PLA, ABS, PETG |
| Connectivity | USB |
| Display | 4.3-inch color screen |
| Printing Speed | up to 120 mm/s |
| Bed Leveling | Automatic (CR Touch) |
Steps to ensure perpendicularity and flush alignment of Z-axis profiles.
Positioning and securing the power supply and display fixing plate.
Attaching the Z-axis motor assembly and T-rod for secure operation.
To Next Page