Need help?Do you have a question about the Creality Ender-3 Max and is the answer not in the manual?
General| Build Volume | 300 x 300 x 340 mm |
|---|---|
| Layer Resolution | 0.1-0.4 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Max Nozzle Temperature | 260°C |
| Max Bed Temperature | 100°C |
| Connectivity | SD card, USB |
| Technology | FDM (Fused Deposition Modeling) |
| Machine Dimensions | 513 x 563 x 590 mm |
| Power Supply | 350W |
| Printing Speed | 180 mm/s |
| Supported Materials | PLA, ABS, TPU, PETG |
| Display | 4.3-inch Color Touchscreen |
Details the first method for preheating the 3D printer via its user interface.
Details the second method for preheating the 3D printer using its user interface.
Guide to installing, opening, configuring the slicer software and loading print files.
Covers generating G-code and executing print files from storage for the printing process.
To Next Page