Need help?Do you have a question about the Creality Ender-3 S1 Pro and is the answer not in the manual?
General| Build Volume | 220 x 220 x 270 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Max Nozzle Temperature | 300°C |
| Filament Diameter | 1.75 mm |
| Display | 4.3-inch color touchscreen |
| Frame Material | Aluminum |
| Extruder Type | Direct Drive |
| Power Supply | 350W |
| Dual Z-axis | Yes |
| All-metal Hotend | Yes |
| Supported Filaments | PLA, ABS, PETG, TPU |
| Connectivity | SD Card, USB |
| Leveling | Automatic |
| Printing Speed | 150 mm/s |
| Max Bed Temperature | 110°C |
Details the various ports on the mainboard, including power, motor, and fan connections.
Identifies ports related to the nozzle and heating elements on the printer's mainboard.
Explains the connections and pin assignments for the Z-axis assembly.
Guides on attaching the nozzle module and wire clamp to the extruder.
Details the process of assembling and securing the printer's gantry structure.
Instructions for mounting the printer's display screen.
Steps to attach the filament rack and its related components.
Shows the connections for the X-axis and Z-axis motor ports and limit switches.
Instructions on how to remove and install new filament during printing or when the printer is off.
Guides on downloading, installing, and configuring the Creality Slicer software for the printer.
Steps for using the slicer to generate G-code and transfer it to the printer's memory card.
To Next Page