Creality Ender-3 S1 Pro User Manual

7 Assisted Leveling
Go to Settings → Leveling → Assisted Leveling. Tap numbers ①/②/③/④/⑤ respectively.
2.Return to the previous menu. Enter the assisted leveling interface. Adjust the Z-axis compensation value so
that the height from the nozzle to the printing platform is about the thickness of a piece of A4 paper. Return
to the previous menu, and the Z-axis compensation value will be configured.
(The CR Touch leveling will fail when the platform inclination is greater
than 2 mm. In this case, please use assisted leveling instead.)
The gap is about the thickness of
a piece of A4 paper, and there is
a slight resistance when pulling
the paper.
-2.30
-2.30
0%

Creality Ender-3 S1 Pro Specifications

General

Build Volume	220 x 220 x 270 mm
Nozzle Diameter	0.4 mm
Max Nozzle Temperature	300°C
Filament Diameter	1.75 mm
Display	4.3-inch color touchscreen
Frame Material	Aluminum
Extruder Type	Direct Drive
Power Supply	350W
Dual Z-axis	Yes
All-metal Hotend	Yes
Supported Filaments	PLA, ABS, PETG, TPU
Connectivity	SD Card, USB
Leveling	Automatic
Printing Speed	150 mm/s
Max Bed Temperature	110°C