Creality Ender 3 Pro User Manual

Version 1.0

Creality Ender 3 Pro Specifications

General

Build Volume	220 x 220 x 250 mm
Layer Resolution	0.1 - 0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Max Nozzle Temperature	255°C
Max Bed Temperature	110°C
Connectivity	SD card, USB
Frame Material	Aluminum
Machine Dimensions	440 x 410 x 465 mm
Print Technology	FDM (Fused Deposition Modeling)
Bed Leveling	Manual
Display	LCD
Print Speed	180 mm/s
Supported Filament Types	PLA, ABS
Input Voltage	AC 100-120V / 200-240V
Power Supply	Meanwell Power Supply

Summary

Step 14: Auto Homing Procedure

Initiating Auto Home

Guide on how to initiate the auto home command on the printer.

Step 15: Verifying Stepper Motor Directions

Purpose of Stepper Motor Check

Checking X-axis Movement

Instructions for moving the X-axis carriage to verify direction.

Checking Y-axis Movement

Instructions for moving the print bed to verify direction.

Checking Z-axis Movement

Instructions for moving the Z-axis gantry to verify direction.

Addressing Wiring and Obstructions

Step 16: Loading Filament and Priming the Hot-end

Prepare Filament and Extruder

Prepare PLA spool and feed filament into the extruder.

Preheating the Hot-end

Set and allow the hot-end to reach the printing temperature.

Confirm Filament Flow and Cooldown

Step 17: Levelling the Printer Bed

Preheating for Bed Levelling

Preheat components for accurate bed levelling.

Performing Auto Home for Levelling

Initiate auto home after preheating.

Disabling Stepper Motors for Manual Movement

Disable motors to allow manual movement for levelling.

Adjusting Bed Corners for Clearance

Adjust bed height at corners using paper for clearance.

Cooling Down Heated Components

Step 18: Slice and Load G-code onto microSD

Create G-code File

Save G-code to microSD

Step 19: Load SD Card and Print G-code

Insert microSD Card

Select and Print G-code File