Creality Ender 3 Pro Assembly Instructions V1.0 34 www.rb42.blog
NOTE>> For the following steps (14 though 19) Use the navigation dial to enter the main options menu from the
main information screen, turning the navigation dial either clockwise or anti-clockwise to scroll through the listed
menu options and pressing the dial to make selections at the appropriate menu option.
Step 14 - Auto homing
Process
In the main options menu, select prepare and then Auto
Home to initiate an auto home command for each of the
printers axis'.
Main>Prepare>Auto Home
The printer will run an Auto Homing process and place the
printer head in the front left of the build plate once the
process has been run.
To Next Page
Loading...
