Creality Ender 3 Pro - Step 18: Slice and Load G-code onto microSD; Create G-code File; Save G-code to microSD

Creality Ender 3 Pro Assembly Instructions V1.0 53 www.rb42.blog
Step 18 - Slice and load G-code onto microSD
**For the purpose of this tutorial, I will keep the slicing of a STL and saving to file to as simple form as possible.
Slicing software and associated software for 3D printing is a topic for another post as there is too much to cover in
enough detail here.
Process
18.1
Using your preferred slicing software, create a
G-code file and name it accordingly.
18.2
Save the G-code onto the microSD