5. Equipment Maintenance
5.1 Platform plate removal and maintenance
17
Tips: 1. The printing platform is not easy to bend too large in daily use, and it is impossible to prevent deformation from being unusable;
2. The printing platform is a perishable part, and it is recommended to replace it regularly to ensure that the first layer of the model sticks properly.
5.2 Screw and smooth shaft lubrication
It is recommended to purchase your own lubricant and regularly lubricate and maintain the screw and smooth shaft.
② If there are residual filaments on the
platform plate, scrape them off lightly
with a blade and print again.
③ If the first layer of the model is not
properly glued, it is recommended
to apply solid adhesive evenly on
the surface of the platform plate
before preheating for printing.
①
a. When printing is finished, wait for the platform plate to
cool before removing the printing platform with the model
attached;
b. Slightly bend the platform with both hands to separate
the model from the platform."
Smooth shaft lubrication
Lead screw lubrication
To Next Page
Loading...
