Creality Ender-5 User Manual

Ender-5 Printer
Guide Book
◆ This guide book is for standard Ender-5.
◆ Please plug the power cord into a three-hole power jack.
◆ Detailed instructions for use are available on the TF card.
V.1.0
To be the Chief Evangelist
To make Top-quality 3D printer

Creality Ender-5 Specifications

General

Build Volume	220 x 220 x 300 mm
Filament Diameter	1.75 mm
Bed Leveling	Manual
Heated Bed	Yes
Max Nozzle Temperature	260°C
Print Technology	FDM (Fused Deposition Modeling)
Display	LCD
Layer Resolution	0.1 - 0.4 mm
Nozzle Diameter	0.4 mm
Supported Filaments	PLA, ABS, TPU, PETG
Connectivity	SD Card, USB
Frame Material	Aluminum

Summary

Preface

Notes and Safety Precautions

Introduction and Component Identification

General Parts and Tool List

Assembly Step 1

Assembly Step 2

Assembly Step 3

Assembly Step 4

Assembly Step 5

Cable Connection Part 1

Cable Connection Part 2

Screen Information and Options

Loading Filament

Preheat

Preheats the printer nozzle and bed via the screen interface for filament loading.

Feeding Filament

Inserts 1.75mm filament into the extruder until it extrudes from the nozzle.

Bed Leveling Procedure

Software Installation Guide

Preparing to Print

Slicing Process

Details inserting the SD card into the computer and selecting files in slicing software.

Printing Setup

Instructs on inserting the SD card into the printer and selecting the file to print.

Troubleshooting Common Issues

Circuit Wiring Diagram