Need help?Do you have a question about the Creality Sprite Extruder Pro Kit and is the answer not in the manual?
Lists the main extruder unit and adapter board.
Includes the bracket for mounting the extruder.
Details screws, nozzle, and flat cable.
Attaching the backplate kit to the X-axis profile.
Ensuring the backplane slides smoothly on the X-axis.
Fixing the extruder to the backplate using screws.
Guide for connecting extruder wires to the mainboard interfaces.
Setting the extruder steps per mm for accurate extrusion.
Re-leveling the print bed after installation.
Tuning filament pressure and retraction settings.
Recommended settings for various filament types.
Specific retraction distances and speeds for PLA/TPU.
Guide on using paper to set nozzle height for leveling.
Lists the main extruder unit and adapter board.
Includes the bracket for mounting the extruder.
Details screws, nozzle, and flat cable.
Attaching the backplate kit to the X-axis profile.
Ensuring the backplane slides smoothly on the X-axis.
Fixing the extruder to the backplate using screws.
Guide for connecting extruder wires to the mainboard interfaces.
Setting the extruder steps per mm for accurate extrusion.
Re-leveling the print bed after installation.
Tuning filament pressure and retraction settings.
Recommended settings for various filament types.
Specific retraction distances and speeds for PLA/TPU.
Guide on using paper to set nozzle height for leveling.
General| Extruder Type | Direct Drive |
|---|---|
| Max Temperature | 300°C |
| Drive Gear Ratio | 3.5:1 |
| Filament Diameter | 1.75mm |
| Extrusion Force | 80N |
| Heater Cartridge Power | 40W |
| Thermistor | NTC100K |
| Filament Compatibility | PLA, TPU, PETG, ABS |
| Nozzle Diameter | 0.4 mm |
| Cooling Fan | Yes |
To Next Page