Creality Sprite Extruder Pro Kit

The specific values of printing parameters need to be adjusted according to filaments of different manufacturers.
Retraction speed: 35-45 mm/s
Retraction distance (direct drive) for rigid materials (PLA):
0.8 mm
Retraction distance (direct drive) for soft materials (TPU-95):
2 mm
Sprite Extruder Pro Kit Material Guide
CR-PLA
CR-TPU
HP-TPU
NO
NO
NO
NO
NO
NO
0.8mm
2mm
2mm
40mm/s
40mm/s
40mm/s
60℃
60℃
60℃
200℃
230℃
210℃
50mm/s
50mm/s
50mm/s
Material
Printing with
enclosure
recommended
Dry box
recommended
Retraction
distance
Retraction
speed
Heatbed
temperature
(+- 5°C)
Recommended
printing speed
Nozzle
temperature
(+- 5°C)
Caution:
① All wires must not be clamped during machine assembly;
② For parameter configuration and more advanced configurations,
please refer to the official website: www.creality.com
具体打印参数需要根据不同耗材生产商做调整。
回抽速度：
硬质耗材（PLA）回抽距离(近端挤出): 0.8mm
软质耗材（TPU-95）回抽距离(近端挤出): 2mm
Sprite Extruder Pro Kit 耗材指引
CR-PLA
CR-TPU
HP-TPU
NO
NO
NO
NO
NO
NO
0.8mm
2mm
2mm
40mm/s
40mm/s
40mm/s
60℃
60℃
60℃
200℃
230℃
210℃
50mm/s
50mm/s
50mm/s
耗材
使用
保温罩
使用
耗材干燥盒
回抽距离 回抽速度
热床温度
(+- 5°C)
推荐打印速度
喷嘴温度
(+- 5°C)
提示:
① 安装过程中，所有线不能缠绕。
② 更多参数和高级设置，请参考官网: www.creality.com
06
If 3D printer restarts during hotend heating up,
please reverse the heating tube connectors on mainboard.
若打印模型加热喷头时，3D打印机出现重启现象，将加热管主板端
接头位置对调。