Need help?Do you have a question about the Creality CR-6 SE and is the answer not in the manual?
General| Build Volume | 235 x 235 x 250 mm |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Printing Speed | 80 - 100 mm/s |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | SD card, USB |
| Supported Materials | PLA, ABS, PETG, TPU |
| Frame Material | Aluminum |
| Display | 4.3-inch Color Touchscreen |
| Max Nozzle Temperature | 260°C |
| Max Bed Temperature | 110°C |
| Machine Dimensions | 442 x 462 x 540 mm |
| Resume Print Function | Yes |
| Leveling | Automatic |
To Next Page