Creality CR-6 SE - Start Printing

4.Open the software→Load→Select the file→Wait
for slicing to finish
打开创想三维切片软件→Load（读取文件）→选择文件
3. Select language→Next→Select your machine→Next→Finish.
1. Double click to install the software. | 安装软件
2、Double click to open the software. | 打开软件
Start Printing
>>
>>
开始打印
3.依次选择语言→Next→选择对应机型→Next→Finish，完成设置.
>>
12
>>