Need help?Do you have a question about the Creality CR-6 Max and is the answer not in the manual?
General| Build Volume | 400 x 400 x 400 mm |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | SD card, USB |
| Bed Leveling | Automatic |
| Frame Material | Aluminum |
| Nozzle Temperature | Up to 260°C |
| File Format | STL, OBJ, AMF |
| Feeder System | Bowden |
| Print Technology | FDM |
| Auto Leveling | Yes |
| Display | 4.3-inch touchscreen |
| Supported Materials | PLA, ABS, PETG, TPU |
| Power Supply | 24V |
To Next Page
