Creality CR-6 Max User Manual

Easier to replace the platform and adjust the belt
更换平台更容易，调节皮带更方便
5
1.Rotate the glass pick-and-place handleplate for platform
replacement.
1.转动玻璃取放手柄压板可进行平台更换。
2.Then manually turn the knob to the appropriate tightness
to avoid belt breakage. (as shown in figure A, three places)
2.然后手动将旋钮左右拧到适合松紧度，过紧容易造成皮带崩断。
（如图所示A三处）
A
A
A

Creality CR-6 Max Specifications

General

Build Volume	400 x 400 x 400 mm
Layer Resolution	0.1 - 0.4 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD card, USB
Bed Leveling	Automatic
Frame Material	Aluminum
Nozzle Temperature	Up to 260°C
File Format	STL, OBJ, AMF
Feeder System	Bowden
Print Technology	FDM
Auto Leveling	Yes
Display	4.3-inch touchscreen
Supported Materials	PLA, ABS, PETG, TPU
Power Supply	24V