Creality CR-5 User Manual

◆ Because of software or hardware upgrades and model differences,
new revisions may not be listed in this Manual.
◆ Please plug the power cord into a three-hole power jack.
◆ Detailed instructions for use are available in the storage card.
V.2.0
3D Printer User Manual
Applicable Models：
CR-5/CR-5S/CR-3040
CR-4026/CR-4040
CR-5060/CR-5080 etc.

Creality CR-5 Specifications

General

Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	USB, SD Card
Printing Technology	FDM (Fused Deposition Modeling)
Supported Materials	PLA, ABS, PETG, TPU
Display	Touch Screen