Need help?Do you have a question about the Creality CR-M4 and is the answer not in the manual?
General| Build Volume | 450 x 450 x 470 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Max. Nozzle Temperature | 300°C |
| Number of Extruders | 1 |
| Frame Material | Aluminum Alloy |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, Wi-Fi |
| Supported Materials | PLA, ABS, PETG, TPU |
| Power Supply | 50/60Hz |
| Print Speed | 30 - 120 mm/s |
Steps for attaching the X-axis cable drag chain to the gantry frame.
Instructions for mounting the gantry frame onto the base component.
Procedure for installing the Z-axis cable drag chain.
Guide to starting the auto-leveling process from the main interface.
Steps for setting the Z-axis offset for optimal nozzle-to-bed distance.
To Next Page