Need help?Do you have a question about the Creality CR-10 S4 and is the answer not in the manual?
General| Build Volume | 400 x 400 x 400 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | SD card, USB |
| Frame Material | Aluminum |
| Bed Leveling | Manual |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Heated Bed | Yes |
| Nozzle Temperature | Up to 250°C |
| Layer Resolution | 0.1 - 0.4 mm |
| Printing Speed | Up to 180 mm/s, typically 40-80 mm/s |
| Supported Filament Types | PLA, ABS, TPU, Wood |
| Bed Temperature | Up to 100°C |
| Power Supply | 110V/220V |
Adjusting the V-wheel tightness for smooth X and Y axis movement.
Adjusting the V-wheel tightness for smooth Z axis movement.
Details the limited warranty period and coverage for the 3D printer and its parts.
Specifies the conditions and requirements for warranty coverage of product defects.
Lists conditions and causes for which CREALITY does not guarantee service.
Offers lifetime technical support and guidance for product-related issues.
Advises users to read the manual and contact support for service and warranty claims.
To Next Page