Creality CR-10 S4 User Manual

1.Slicing
2.Printing
Insert the TF card→ Print → Select the file to be printed.
Open the software→Load→Select the file→Wait for slicing to finish ,and save the gcode file to TF card.
12.First Printing
Warning: Please don't insert or remove storage card.
12

Creality CR-10 S4 Specifications

General

Build Volume	400 x 400 x 400 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD card, USB
Frame Material	Aluminum
Bed Leveling	Manual
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Nozzle Temperature	Up to 250°C
Layer Resolution	0.1 - 0.4 mm
Printing Speed	Up to 180 mm/s, typically 40-80 mm/s
Supported Filament Types	PLA, ABS, TPU, Wood
Bed Temperature	Up to 100°C
Power Supply	110V/220V