Creality CR-10 S4 User Manual

04
Tool list
Tool Box
Control Box
No. Image Name Qty No. Image Name Qty No. Image Name Qty
1
Spool & Nuts 1 7 Power Cable 1 13 Spade 1
2 Spool Holder 1 8 USB Cable 1 14 Cable Ties 1
3
TF Card & Card
Reader
1 9
PTFE Tubing
(spare part)
1 15
Hex keys, Wrench
& Screwdriver
1
4 T- Bracket (Right) 1 10 Nozzle Cleaner 1 16 Spare Parts 1
5
T- Bracket
& Z Limit Switch
(Left)
1 11 Filament（200g） 1 17 Decorative Strip 1
6
M5X25 Bolt & Lock
Washer
4 12 Diagonal Pliers 1 18 Thumb Screw 3
Base Frame
Gantry Frame
*CR- 10 mini without T- Bracket (Right) & Decoration Strip.
4.General List
Tips: the above accessories are for reference only, please refer to the physical accessories!

Creality CR-10 S4 Specifications

General

Build Volume	400 x 400 x 400 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD card, USB
Frame Material	Aluminum
Bed Leveling	Manual
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Nozzle Temperature	Up to 250°C
Layer Resolution	0.1 - 0.4 mm
Printing Speed	Up to 180 mm/s, typically 40-80 mm/s
Supported Filament Types	PLA, ABS, TPU, Wood
Bed Temperature	Up to 100°C
Power Supply	110V/220V