Need help?Do you have a question about the Creality CR-10 Max and is the answer not in the manual?
General| Build Volume | 450 x 450 x 470 mm |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 260°C |
| Connectivity | SD card, USB |
| Frame Material | Aluminum |
| File Format | STL, OBJ, AMF |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Heated Bed | Yes |
| Nozzle Diameter | 0.4 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Display | Touchscreen |
| Print Speed | ≤180mm/s, Normal 30-60mm/s |
| Max Bed Temperature | 100°C |
| Bed Leveling | Automatic |
List of tools included with the printer for assembly and maintenance.
Detailed breakdown of the pull rod components and assembly instructions.
Instructions for preheating the nozzle and hotbed for filament loading.
Process of feeding filament through the extruder and nozzle.
Steps for changing filament while a print is in progress.
Procedure for adjusting X and Y axis V-wheels for smooth movement.
Procedure for adjusting Z axis V-wheels to prevent sticking.
Manual bed leveling procedure using the printer's interface and A4 paper.
Procedure for performing automatic bed leveling via the printer's interface.
Process of preparing a 3D model for printing using slicing software.
Steps to initiate and monitor the 3D printing process from the SD card.
Details of the warranty coverage period and terms for the purchased product.
Specifies the conditions and defects covered under the product warranty.
Lists the exclusions and conditions not covered by the manufacturer's warranty.
Information on how to obtain technical assistance and support for the product.
Important notices regarding user manuals, warranty, and contact information.
Section for initiating a repair request for the product.
Section for requesting a product exchange or replacement.
Section for initiating a product return process.
To Next Page