Creality CR-10 Max User Manual

Insert the Storage card → Print → Select Model → Print
2. Printing
Open the software → Load → Select the file → Wait for slicing to finish ,and save the gcode file to
* File name must be English or number. Don’t use Chinese or special symbols
1. Slicing
Storage card.
12.First Printing
Warning: Please don't insert or remove storage card.
12

Creality CR-10 Max Specifications

General

Build Volume	450 x 450 x 470 mm
Layer Resolution	0.1 - 0.4 mm
Filament Diameter	1.75 mm
Max Nozzle Temperature	260°C
Connectivity	SD card, USB
Frame Material	Aluminum
File Format	STL, OBJ, AMF
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Nozzle Diameter	0.4 mm
Supported Materials	PLA, ABS, PETG, TPU
Display	Touchscreen
Print Speed	≤180mm/s, Normal 30-60mm/s
Max Bed Temperature	100°C
Bed Leveling	Automatic