Need help?Do you have a question about the Creality CR-10 Max and is the answer not in the manual?
General| Build Volume | 450 x 450 x 470 mm |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 260°C |
| Connectivity | SD card, USB |
| Frame Material | Aluminum |
| File Format | STL, OBJ, AMF |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Heated Bed | Yes |
| Nozzle Diameter | 0.4 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Display | Touchscreen |
| Print Speed | ≤180mm/s, Normal 30-60mm/s |
| Max Bed Temperature | 100°C |
| Bed Leveling | Automatic |
To Next Page