Creality CR-10 S4 User Manual

After-Sales Service Card
Scan the code to know more
Please read the user manual and warranty card carefully before the use.
For any service, Please priorly contact local seller or contact us via
Email: cs@creality.com for support.
See www.creality.com/after-service-policy/ for specific warranty information
about your product and procedures to act on a warranty claim.
16

Creality CR-10 S4 Specifications

General

Build Volume	400 x 400 x 400 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD card, USB
Frame Material	Aluminum
Bed Leveling	Manual
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Nozzle Temperature	Up to 250°C
Layer Resolution	0.1 - 0.4 mm
Printing Speed	Up to 180 mm/s, typically 40-80 mm/s
Supported Filament Types	PLA, ABS, TPU, Wood
Bed Temperature	Up to 100°C
Power Supply	110V/220V