Need help?Do you have a question about the Creality Ender-7 and is the answer not in the manual?
General| Build Volume | 250 x 250 x 300 mm |
|---|---|
| Print Speed | Up to 250 mm/s |
| Layer Resolution | 0.1 - 0.4 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, SD Card |
| Supported Filaments | PLA, ABS, PETG |
| File Format | STL, OBJ, AMF |
| Max Nozzle Temperature | 260°C |
| Max Bed Temperature | 100°C |
| Machine Dimensions | 430 x 460 x 570 mm |
| Machine Weight | 17.2 kg |
| Frame Material | Aluminum Alloy |
| Power Supply | 350W |
To Next Page