Creality CR-10 Smart User Manual

11. Start Printing 开始打印16. Network reset 网络复位
>>
>>
1. For the first use or after the WiFi path is reset, the WiFi will be reset after 1 minute.
1. 在首次使用以及WiFi路径进行复位，请等待1分钟之后WiFi复位
2. The interface is for reference only, and the actual UI shall prevail.
2. 界面仅供参考，实际以UI为准。
Note:
注意：
19

Creality CR-10 Smart Specifications

General

Build Volume	300 x 300 x 400 mm
Layer Resolution	0.1-0.4 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Touchscreen	Yes
Bed Temperature	up to 100°C
Nozzle Temperature	up to 260°C
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Power Supply	350W
Machine Dimensions	578 x 522 x 648 mm
Machine Weight	14 kg
Connectivity	Wi-Fi, USB
Supported Filaments	PLA, TPU, PETG
Bed Leveling	Automatic