Creality CR-10 S5 User Manual

After-Sales Service Card
Scan the code to know more
Please read the user manual and warranty card carefully before the use.
For any service, Please priorly contact local seller or contact us via
Email: cs@creality.com for support.
See www.creality.com/after-service-policy/ for specific warranty information
about your product and procedures to act on a warranty claim.
16

Creality CR-10 S5 Specifications

General

Build Volume	500 x 500 x 500 mm
Layer Resolution	0.1-0.4 mm
Printing Speed	Up to 200 mm/s
Filament Diameter	1.75 mm
Connectivity	SD card, USB
Frame Material	Aluminum
Display	LCD screen
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Bed Temperature	Up to 100°C
Nozzle Temperature	Up to 250°C
File Format	STL, OBJ, G-code
Nozzle Diameter	0.4 mm
Supported Filaments	PLA, ABS, TPU
Power Supply	AC 110-220V