Creality CR-10 S5 User Manual

04
Tool list
Tool Box
Control Box
No. Image Name Qty No. Image Name Qty No. Image Name Qty
1
Spool & Nuts 1 7 Power Cable 1 13 Spade 1
2 Spool Holder 1 8 USB Cable 1 14 Cable Ties 1
3
TF Card & Card
Reader
1 9
PTFE Tubing
(spare part)
1 15
Hex keys, Wrench
& Screwdriver
1
4 T- Bracket (Right) 1 10 Nozzle Cleaner 1 16 Spare Parts 1
5
T- Bracket
& Z Limit Switch
(Left)
1 11 Filament（200g） 1 17 Decorative Strip 1
6
M5X25 Bolt & Lock
Washer
4 12 Diagonal Pliers 1 18 Thumb Screw 3
Base Frame
Gantry Frame
*CR- 10 mini without T- Bracket (Right) & Decoration Strip.
4.General List
Tips: the above accessories are for reference only, please refer to the physical accessories!

Creality CR-10 S5 Specifications

General

Build Volume	500 x 500 x 500 mm
Layer Resolution	0.1-0.4 mm
Printing Speed	Up to 200 mm/s
Filament Diameter	1.75 mm
Connectivity	SD card, USB
Frame Material	Aluminum
Display	LCD screen
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Bed Temperature	Up to 100°C
Nozzle Temperature	Up to 250°C
File Format	STL, OBJ, G-code
Nozzle Diameter	0.4 mm
Supported Filaments	PLA, ABS, TPU
Power Supply	AC 110-220V