The CR-10 S5 is one of the biggest available consumer printers. If you decide to
buy one, make sure to clear up some space in your toolshed or lab. Also, make
sure to include some additional space for the control box.
Although being marketed as a 3D printer kit, the Creality CR-10 S5 comes mostly
pre-assembled. All you have to do is to mount the Z-axis to the base, connect the
cables and you’re ready to 3D print. This shouldn’t take longer than 30 to 60
minutes.
In the box, you will find these parts:
2 pre-assembled frames
tools for the assembly of the Creality CR-10 S5
some spare parts
Spatula for removing the print from the glass bed
Needle for cleaning of clogged nozzles
Teflon tube
To Next Page
