Creality CR-10 S5 User Manual

15. Filaments Parameter Information
190-220
190-220
190-220
190-220
220-260
230-250
210-240
190-220
230-260
190-220
190-220
60-100
50-60
50-60
50-60
50-60
90-110
60-100
50
50-60
80-90
50-60
50-60
-
HP-PLA
HP-PLAx3
CR-PLA
HC/EN-PLA
Hot bed is needed, and Creality printer enclosure
is recommended for DIY machine
Hot bed is needed, and Creality printer enclosure
is recommended for DIY machine
Hot bed is needed, and Creality printer enclosure
is recommended for DIY machine
Suitable for 99% FDM models
Suitable for 99% FDM models
Suitable for 99% FDM models
Suitable for 99% FDM models
Direct extrusion models
Suitable for 99% FDM models
Suitable for 99% FDM models
Creality K5、K8、T5
Low temperature 3D printing pen
Material Print Temp (℃) Bed Temp (℃) Difficulty Flexibility Shrinkage Ductility Applicable Models
PLA
Series
ABS
PETG
TPU
Silk
Nylon
PDS Advertising word
filament-PLA
Carbon
(Ordinary type)
Low temperature filament-PCL
15

Creality CR-10 S5 Specifications

General

Build Volume	500 x 500 x 500 mm
Layer Resolution	0.1-0.4 mm
Printing Speed	Up to 200 mm/s
Filament Diameter	1.75 mm
Connectivity	SD card, USB
Frame Material	Aluminum
Display	LCD screen
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Bed Temperature	Up to 100°C
Nozzle Temperature	Up to 250°C
File Format	STL, OBJ, G-code
Nozzle Diameter	0.4 mm
Supported Filaments	PLA, ABS, TPU
Power Supply	AC 110-220V