Creality HALOT-ONE PLUS User Manual

09
7. Load Resin
Tips: How to change resin?
Take out the resin vat slowly, pour out the remaining resin into the container,
clean the resin vat, pour in new resin,and then install the resin vat to the
machine.
Caution: Resin may cause skin irritation or an allergic skin reaction.
Please wear gloves before use to avoid direct contact with the skin.
650ml
450ml
250ml
Pour the UV photosensitive resin into the resin vat. The slot capacity is 250ml/450ml/650ml.

Creality HALOT-ONE PLUS Specifications

General

Brand	Creality
Model	HALOT-ONE PLUS
Category	3D Printers
Language	English