13
ENGLISH
Before performing tasks of cleaning and maintenance, turn off the machine and unplug it.
1. Clean the surface:
• Clean the surface of the machine with a wet soft cloth. Don’t use chemicals, such as ben-
zene, alcohol, gasoline, etc; otherwise, the surface of the air conditioner will be damaged
or even the whole machine will be damaged.
• -
•
• ) and dry
it in the shade after rinsing clean.
• Unscrew the drainage cover, unplug the water plug, and discharge the water in the water
tank into other water containers or directly tilt the body to discharge the water into other
containers.
• Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until
the drainage pipe becomes
• dry, so as to keep the inside of the body in a dry state and prevent it from mildewing.
• Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping
post; install the water plug and the drainage cover.
• Remove the exhaust pipe and keep it properly.
• Cover the air conditioner with a plastic bag. Put it in a dry place, keep it out of the reach of
children, and take dust control measures.
• Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all machine components properly.
MAINTENANCE
STORAGE
To Next Page
Loading...
