10
ENGLISH
SYSTEM REQUERIMENTS
FROST PROTECTION FUNCTION
OVERFLOW PROTECTION FUNCTION
AUTOMATIC DEFROSTING
COMPRESSOR PROTECTION FUNCTION
HOW TO CONNECT TO THE APP
• iOs 8.0 or higher.
• Android 4.1 or higher.
In cooling, dehumidifying or economic power-saving mode, if the temperature of the exhaust
pipe is too low, the air conditioner will automatically enter protection status; if the tempera-
ture of the exhaust pipe rises to a certain temperature, it can automatically revert to normal
operation.
When water in the water tank exceeds the warning level, the machine will automatically
drainage pipe connecting the device or the water outlet to a sewer or other drainage area
to empty the water. After the water is emptied, the device will automatically return to the
original state.
The machine has automatic defrosting function. Defrosting can be achieved through a four-
way valve reversing system.
To increase the service life of the compressor, it has a 3-minute delay booting protection
function after the compressor is turned off.
Warning: Before using this portable air conditioner, keep it upright for at least two hours.
• The air conditioner can be easily moved in the room. In the moving process, ensure that
the air conditioner is in the upright position and the air conditioner should be placed on
environments.
1. Install the CREATE HOME app and create a user account.
2. Activate the WiFi function in the settings of your appliance.
3. The appliance must be in Standby mode.
4. Place the appliance at a distance of about 5 meters to your router.
5. Press and hold the button
6. Launch the app and select “ + ”.
7. Select the “air conditioner” menu and follow the instructions on the display.
8. Once the appliance has been successfully connected, the button lights up. Now you
can operate the appliance using the app.
PROTECTION FUNCTIONS
INSTALLATION AND ADJUSTMENT
To Next Page
Loading...