EasyManua.ls Logo

Create THERA MATT PRO - Select the Function; Brewing Espresso; Brewing Cappuccino and Latte

Create THERA MATT PRO
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
ENGLISH
SELECT THE FUNCTION
Espresso:
1. Press coffee button once (
illuminates) to brew a single cup of coffee.
2. Press coffee button twice (
illuminates) to brew a double cup of coffee.
3. Press and hold the coffee button for 3 seconds (
illuminate at the same time) to
brew a big cup of coffee. When the coffee amount reaches your need, you can press any
button to stop working.
The unit can brew espresso according to your setting, and it can stop automatically. When
light solidly, it means it has nished brewing and you can enjoy your espresso.
Warning: After the coffee machine has nished brewing, please don’t take out the lter
immediately, just wait for 10 seconds more or less.
Cappuccino:
Before brewing cappuccino, turn the froth control knob to the middle position, you can ad-
just the quantity of frothed milk according to your preference by turning the Froth Control
Knob to the right for more froth and to the left for less froth.
Note: The froth intensity can be adjusted during the brewing cycle.
1. Press the Cappuccino Button once to brew a small cup of cappuccino.
2. Press the Cappuccino Button twice to brew a large cup of cappuccino.
The unit will start brewing the cappuccino according to your selection. After that, your
delicious cappuccino is ready to be enjoyed.
Latte:
Prior to preparing your latte, adjust the quantity of frothed milk according to your prefer-
ence by turning the Froth Control Knob to the right for more froth and to the left for less
froth.
1. Press the Latte button once to brew a small cup of latte coffee.
2. Press the Latte button twice to brew a large cup of latte coffee.
Turn the unit on:
4. Make sure the unit is plugged in.
5. Turn the unit on “I” position. The six control panel lights will start blinking during heating
and until the water reaches the perfect temperature. Once the six lights become solid,
the unit is ready to use.
Note: The frothing tube is very hot, please take care.

Table of Contents

Related product manuals