EasyManua.ls Logo

Create THERA MATT PRO - Troubleshooting; Common Issues and Solutions

Create THERA MATT PRO
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
ENGLISH
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Coffee does not come
out.
1. No water in tank.
2. Coffee grind is too fine.
3. Too much coffee in the
filter.
4. Appliance was not turned
on or plugged in.
5. Coffee has been tamped/
compressed too much.
1. Add water
2. Grind medium ground coffee.
3. Fill filter with less coffee.
4. Plug unit into electrical out-
let and turn it on.
5. Refill filter basket with cof-
fee, do not tamp too much.
Coffee comes out
around the edge of
the porta-filter.
1. Porta-filter not rotated to
full lock position.
2. Coffee grounds around the
filter basket rim.
3. Too much coffee in the
filter.
1. Rotate filter holder to full
lock position.
2. Wipe off rim.
3. Fill with less coffee.
Milk is not foamy
after frothing or it is
not coming out of the
frothing tube.
1. It ran out of steam.
2. Milk is not cold enough.
3. Frothing tube is blocked.
1. Ensure there is enough water
in the tank.
2. Chill milk and frothing tank
prior to making cappuccino.
3. Follow the instructions to
clean the milk tank and
frothing tube.
Coffee comes out too
quickly.
1. Ground coffee is too coarse.
2. Not enough coffee in filter.
1. Use a finer grind.
2. Use more coffee.
Coffee is too weak.
1. You are using the small
filter for double espresso.
2. Ground coffee is too coarse.
1. Use large filter for double
espresso.
2. Use a finer grind.
The three control
panel lights are flas-
hing alternatively.
Water tank is out of water. Add water to tank.

Table of Contents

Related product manuals