Creation CT630 - System Setting and Storage

-*-PCUT-*-
*CT-630*
Ver4.11a
0012345
Wait......
While the cutting plotter is working,
pressRESET,the machine will
reinitialize and reset.
“”
Working state
6.3.6 System setting and storage
While in off-line state, press“MODE”button to set system parameters, the LCD will
display the options of system parameters. Press“ MODE”button to show the options in
urn, press“ +”or“ -”to change the parameter value of selected option. When the
setting is completed, press“PAUSE” to escape setting mode, press“ ON LINE” and
save the setting value。
For example, in speed setting state:
CutSpeed
+ 70 -
CutSpeed
+ 80 -
X=+00000
Y=+00000
On Line...
Press+to change the speed value
PressPAUSEto back to offline
state
PressON LINEto save present
system parameters.
“”
“”
“”
PCUT SERIES USER ‘ S MANUAL Cutting plotter PCUT CT operating instructions
21