Installing PC-CAM 350 1-5
❑ Auto Flash
This icon indicates that your camera is in Auto Flash mode. In this mode, the
camera automatically detects whether there is sufficient light and activates the
camera flash if needed.
❑ No Flash
This icon indicates that your camera’s flash is disabled.
❑ Battery level indicator
This icon displays the battery level.
❑ Audio cues enabled
This icon indicates that the various audio cues built into your camera are
enabled. When these cues are enabled, various beep sounds and shutter
sounds are emitted. Press the Operation Mode button for two seconds to
disable your camera’s audio cues. To enable your camera’s audio cues again,
press the Operation Mode button for two seconds.
❑ Image Counter
Depending on which mode you are in, this counter displays
the total number of photos or videos left.
To Next Page
Loading...
