Installing PC-CAM 350 1-9
6. When the PC-CAM 350 Camera Configuration dialog box appears, check the
image in the Video preview pane. If it flickers or displays a series of dark bands,
click the Cancel Flicker button.
7. Click the Finish button, and then restart your computer if you are prompted to
do so.
In Windows 2000
1. Do not connect PC-CAM 350 to your computer before installing the drivers.
If you accidentally begin installation with PC-CAM 350 connected, the Found
New Hardware Wizard dialog box appears. Click the Cancel button.
2. Insert the PC-CAM 350 CD into your CD-ROM drive.
3. Click the names of the drivers and applications you want to install on your
computer.
4. Follow the instructions on the screen to complete the installation. You may be
asked, after an application is installed, if you want to restart your computer. Do
not restart your computer until all the drivers and applications are installed.
5. Connect PC-CAM 350’s USB cable to an available USB port on your computer
(Figure 1-5). Place PC-CAM 350 on top of your computer monitor or another flat
surface.
Windows automatically detects the device.
To Next Page
Loading...
