Installing PC-CAM 350 1-12
Verifying the
installation
In Windows 98/98SE/
Me/2000/XP
1. Click Start -> Settings -> Control Panel. For Windows XP, click Start ->
Control Panel.
2. Double-click the System icon. The System Properties dialog box appears.
3. In the System Properties dialog box, click the Device Manager tab.
For Windows 2000/XP, click the Hardware tab, and then click the Device
Manager button.
4. Click the plus (+) sign next to the Imaging Device icon. The entries Creative
PC-CAM 350 (Still Image) and Creative PC-CAM 350 (Video) should appear.
Click the plus (+) sign next to the Universal Serial Bus controllers icon. The
entry Creative PC-CAM 350 (Composite) should appear.
If it does not, repeat the steps for the correct operating system: “In Windows 98/
98 SE/Me” on page 1-7, “In Windows 2000” on page 1-9 and “In Windows XP” on
page 1-10.
To Next Page
Loading...
