Creative PC-CAM 950 Slim - Turning on Your Camera

About Your Camera 2-6
Tu r n i n g o n Yo u r
Camera
1. Slide and swing open the battery
compartment cover.
2. Insert the batteries according to the + and
- symbols indicated on the inside of the
battery compartment cover (see Figure
2-5).
3. Close the battery compartment cover.
4. Press and hold down the Power button to
turn on your camera.
The Status LED lights up in red and the LCD
is activated.
The Macro LED turns green.
• Be sure to insert
the batteries
according to the
polarity indicated.
If not, the
batteries may leak
and damage your
camera.
• Do not mix old
and new batteries
together.
•To conserve
battery power,
your camera turns
the LCD off if no
operation is made
within 60 seconds.
See "Auto Power
Off" on page 3-5
for more
information.
Figure 2-5: Inserting batteries
Battery compartment cover
Figure 2-6: Power button
Power button
PC-CAM 950 Slim.book Page 6 Tuesday, August 23, 2005 12:57 PM