Creative SB0090 - Connectivity

General Specifications A-3
Creative Multi Speaker
Surround
TM
(CMSS
TM
)
❑
Multispeaker technology
❑
Upmixes mono or stereo sources to 5.1 channels
❑
Professional-quality panning and mixing algorithm
SB1394
TM
Compatibility
❑
Compliant to IEEE 1394a specification
❑
Supports data rates of 100, 200, and 400 Mbps
❑
Supports up to 63 IEEE 1394 compatible devices in a daisy-chain configuration
Connectivity
Sound Blaster
Audigy card
Audio Inputs
❑
One line-level analog Line input via stereo jack on rear bracket
❑
One mono Microphone analog input via stereo jack on rear bracket
❑
CD_IN line-level analog input via 4-pin Molex connector on card
❑
AUX_IN line-level analog input via 4-pin Molex connector on card
❑
TAD line-level analog input via 4-pin Molex connector on card
❑
CD_SPDIF digital input via 2-pin Molex connector on card
Audio Outputs
❑
ANALOG/DIGITAL OUT via 4-pole 3.5 mm minijack on rear bracket
• ANALOG OUT: Center and Subwoofer channels
• DIGITAL OUT: Front, Rear, Center and Subwoofer SPDIF digital outputs
❑
Two line-level analog outputs via stereo jacks on rear bracket, Front and rear
Line-Outs 1 and 2
❑
Stereo headphone (32-ohm load) support on Front Line-Out