Installing Hardware 1-7
Step 2: Install the
Sound Blaster
Audigy 2 card
1. Align the Sound Blaster Audigy 2 card with the PCI slot and press the card gently
but firmly into the slot as shown in Figure 1-4.
2. Secure the card with one of the screws you had placed aside earlier.
Do not force the audio card
into the slot. Make sure that
the gold finger PCI connector
on the Sound Blaster Audigy
2 card is aligned with the PCI
bus connector on the
motherboard before you
insert the card into the PCI
expansion slot.
If it does not fit properly,
gently remove it and try
again
.
Figure 1-4: Securing the audio card to the expansion slot.
2
1
To Next Page
Loading...
